The Envision Glasses are designed in a way that anyone without vision would be able to use the device. We also allowed for optimal personalization for a better experience. Device settings are the settings that can be changed and affect the entire experience of using the Envision Glasses. Inside the device settings you can find the following options to change: Audio, Wi-Fi, Bluetooth, Language, Screen, Software and Power.
Audio
The audio settings allow you to change the volume and speed of the screen reader. In the instructions below we assume that you are wearing the Envision Glasses, that the device is on and that you are on the main menu.
Change volume
Step 1: Go to Device Settings.
Step 2: Go to Audio.
Step 3: Go to Change volume and double-tap. You are now inside the settings to change the volume.
Step 4: Swipe forward to increase the volume, swipe back to decrease the volume.
Step 5: Swipe down to go back and confirm your choice.
Change speed
Step 1: Go to Device Settings.
Step 2: Go to Audio.
Step 3: Go to Change speed and double-tap. You are now inside the settings to change the speed.
Step 4: Swipe forward to increase the speed, swipe back to decrease the speed.
Step 5: Swipe down to go back and confirm your choice.
Wi-Fi
Most of the Envision Glasses features require an internet connection. You can connect to a Wi-Fi connection by using the Envision Glasses or by using the Envision app. Go to chapter 5.1 to learn how to connect to an internet connection.
Bluetooth
The Envision Glasses have a built-in bluetooth module. This not only allows the device to connect to the Envision app, but also to connect to other bluetooth devices such as headphones and earbuds. Go to chapter 5.2 to learn how to connect bluetooth devices to the Envision Glasses.
Language
In the language settings you can change the language of the Envision app.
Step 1: Go to Device Settings.
Step 2: Go to Language and double-tap.
Step 3: Scroll through the list of languages by swiping forward and back.
Step 4: Double-tap on your preferred language. Afterwards, you will hear a processing sound and you will be redirected to the start screen.
Screen
The Envision Glasses have a small screen at the front where images are projected on the glass, which can be used as a visual interface. If you have vision, this screen should still be visible to you. However if you have a little bit of rest vision and the screen is not helping you concentrate, there is a possibility of turning the screen off.
Step 1: Go to Device Settings.
Step 2: Go to Screen and double-tap.
Step 3: The screen reader will speak out whether the screen is on or off. Double-tap to enable or disable the screen.
Step 4: Swipe down to go back and confirm your selection.
Software
The software settings allow you to check whether there is an update and to install the latest software update.
Step 1: Go to Device Settings.
Step 2: Go to Software and double-tap.
Step 3: Double-tap again on Check update.
Step 4: You will hear a fetching sound that checks whether a new update is available. Double-tap again on New update to install the latest software update.
Step 5: A processing sound will be played and you will be redirected to the start screen.
Can’t find a new update? Try restarting your Envision Glasses; hold the power button for 3 seconds, wait 15 seconds and turn it on again by holding it for 6 seconds. After the Envision Glasses are turned on again, try to look for the new update.
Power
The power settings allow to put your device to sleep, check the battery level and explain how to turn off the device.
Sleep
Besides settings the device to sleep mode by physically folding it, the device can also be set to sleep mode in this setting.
Step 1: Go to Device Settings.
Step 2: Go to Power.
Step 3: Double-tap on Sleep, this will trigger the Envision Glasses to go into sleep mode.
Battery
This setting speaks for itself. When navigating to the battery screen, it will announce the battery level. Whenever the device is charging, it will also announce that it is charging.
Pairing Mode
This setting allows you to pair or unpair the Envision Glasses from a device. If you want to pair your glasses with a different device, you can follow the steps below.
Step 1: Make sure that the app has been unpaired from the glasses by going to the glasses tab, select Device Settings and click on Unpair Envision Glasses.
Step 2: Set the glasses into pairing mode. You can do that on the glasses by going to the main menu. Navigate the menu by swiping back or forward and use double-tapping to select the option that you need.
Step 3: Double tap when you reach Device Settings and navigate to the option Pairing Mode. Double-tap to activate it.
Step 4: Your device will now be ready to be paired with another Envision account.
