Getting Started
Turning on your Envision Glasses

Turning on your Envision Glasses

November 4, 2020

Now that your frame is attached to the body, let’s turn on the Envision Glasses! You can do so by holding the power button for 6 seconds. The power button is located in the rear end of the glasses, next to the charging port, on the inside surface. Please, be patient once you have pressed on it for 6 seconds, as it takes about a minute for the device to boot up, and there is no audio cue during this process. You will know the Envision Glasses are on when they start speaking out the start screen, stating to "Go to".

The image (a black and white sketch on purple background) shows the button, highlighted in green, and its location on the main body. The button is located at the very end of the earpiece, behind the user's right ear when wearing the glasses.
Power button at the end of the earpiece (the only physical button of the device).

If the Envision Glasses are not turning on, try charging them with the USB-C cable that is provided in the box. This will not only charge your Envision Glasses, but it will also make sure they get powered on.

Related Articles

Getting Started← Back to Glasses Help